Block Site On Your Computer Easily

Here is a guide to Block the websites that you want to Block to prevent your Brother/Sister for teasing.

Please Note that this will not work If you use proxy from your browser.This tutorial has been tested on Vista/XP/Windows 2003/Windows 2000.

Ok here it is starting

First step is to prepare your self [ Prepare Site list 😛 ]

– Now go to Start and go to Run

– Type Following address/path    c:\WINDOWS\system32\drivers\etc\HOSTS   [please make sure your current/working window installation is on which drive Replace c: with ur windows installtion drive]

– Now open this file in Notepad/Wordpad/Any othe text editor you want

– Note that this is Host file of windows where you can specify the IP address of a Domain

– So now main work come [ I’m taking example to blocking the orkut ]

type following in the last lines of that file

127.0.0.1     orkut.com

127.0.0.1   www.orkut.com

the above will specify orkut.com or www.orkut.com  with an IP address of 127.0.0.1 i.e the domain name of orkut will be resolved as 127.0.0.1

– Now the most Important thing is to save that file 😀

– now open command prompt [ Start -> Run -> CMD ]

– Type following command

ipconfig /flushdns

the above command will flush the DNS cache on ur machine

– Now do following command on command prompt

ping orkut.com

It will show the following

pinging orkut.com [127.0.0.1]  with 32 bytes of data

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

if it is shown its IP address else then 127.0.0.1 then ur setting might be wrong [ In that case you can contact me by leaving a comment here ]

– Now we are in final stage of our tutorial

open you web browser and u will be unable to open the  website you blocked

——————–

Note for user who want to use the block site again

Open the host file as explained above and delete entries and give ipconfig /flushdns command . If u still face problem we will help you . Just leave comments.

———————

Other Intresting Notes or Tips For this HOST file

this host file can be used for making faster site resolving domain name to IP. just enter the IP address of the site you want to make faster .

———————-

THANK YOU

If you have any Problem or Difficulties with this tutorials you can post comments here.

Adobe IMAGEREADY CS2 easter EGG

so here is an duckky easter egg from Imageready CS2

IMG RDY

Run image ready(i think version you know by the titile)
Now with CTRL Key press click “Help” —> “about imageready”
click (holding CTRL key) as shown in this figure where ever you want

Then press alt key and press where you want ducks
These ducks are in number of 10 only.

Now restart the image ready and see welcome screen full of ducky’s

If you want to remove all the ducks please follow the steps :-

Run image ready(i think version you know by the titile)
Now with CTRL Key press click “Help” —> “about imageready”

Now Press CTRL+SHIFT key and click on image

and ducks will be gone now be happy

A guide for C2D Overclocking

Part1. Tidying Up Your BIOS (not all BIOS may have those options)
*You must update your BIOS to the latest version before proceeding*
1. Disable AI Tuning for ASUS ,C.I.A.2 for Gigabyte
2. Set PCI Express (PCIe) frequency @100Mhz (Auto for DS3/DS4/DQ6)
3. Set PCI frequency @33Mhz
4. Disable Hyperpath 3 (for P5W DH only)
5. Disable any spread spectrum
6. Disable Q-Fan (for ASUS only)
7. Disable Limit CPUID Max to 3
8. Disable any overvoltage protection
9. Disable C1E
10. Disable EIST
11. Disable Virtualization Technology
12. Disable No-Execute Memory Protect
13. Disable any other thing you don’t use
14. Do not enable any speed enhancements you see
Part2. Memory Adjustments
**Expand options for Gigabyte BIOS under M.I.T. by pressing CTRL+F1**
Gigabyte: Set Memory Multiplier to 2 (1FSB:1RAM operation)
ASUS: Set DRAM Frequency to DDR2-533 @266Mhz FSB (1FSB:1RAM operation)
As you increase the FSB, the RAM will follow in the pattern of 1:1 shown in BIOS.
1. Set DRAM Timing to manual or disable SPD (use SPD for P5W DH)
2. In BIOS you will see 4 separate timing digits, change them to the ones specified on
your RAM
e.g. 4-4-4-12
CAS# Latency (tCL)
RAS# to CAS# Delay (tRCD)
RAS# Precharge (tRP)
RAS# Precharge Delay or Active to Precharge (tRAS)
When 1FSB:1RAM is overclocked above the rated frequency of your RAM use the
following values
Timing: 5-5-5-15
vDIMM: 2.2V
e.g. DDR2-667 4-4-4-12 1.9V operating at ~400Mhz will need to be set to 5-5-5-15 2.2V
3. Leave the rest of other timings either at Auto or at their default values
Part3. Voltage (again not all BIOS will have the option or uses different name)
***The following voltages are to be used with Part4***
1. Set DRAM/DIMM Voltage (vDIMM) to 2.1V or 2.2V if specified by RAM (+0.3V or
+0.4V) and as you are Overcloking even if your default volatage is 1.8 set it to 2.1
2. Set MCH Voltage (vMCH) to 1.55V
3. Set FSB Voltage (vFSB) to 1.40V
4. Increase SB Voltage (vICH) by +0.1V from default-lowest value
5. Set CPU Voltage (vCore) for the following CPU
E6300=1.370V E6400=1.375V E6600=1.400V E6700=1.400V X6800=1.400V
Part4. Frequency Control
First attempt:
1. Set CPU Host Clock/Frequency (FSB) to 333Mhz (300Mhz for X6800)
2. Set CPU Clock Ratio or Multiplier to the default value for your processor
E6300-> 333*7=2331
E6400-> 333*8=2664
E6600-> 333*9=2997
E6700-> 333*10=3330
X6800-> 310*11=3410
3. Save settings and reboot
Further attempts:
1. Up even more FSB by 5Mhz or 2Mhz increasement
2. Calculate your final clockspeed
3. Up even more vCore if needed by 0.025V increasement
Part5. Stability Testing
You will need the following programs:
– CPU-Z
– Prime95
– Memtest86+
– Core Temp
– SpeedFan
1. Fire up CPU-Z and keep it running in the background to monitor clock speed
2. Fire up Core Temp to monitor temperature but since Core Temp is not so accurate use
TAT
3. Fire up SpeedFan to monitor voltages
3. Run dual instances of Prime95 in torture mode for 2 hours
4. (Optional) Run Memtest86+ for 2hrs
5. If stable go to Part4-Further Attempts, if not go back to last stable frequency
6. Once you’re happy with the settings proceed to the final part
Note1: The higher the final clock speed, the lower the temperature for CPU has to be to
maintain stableness
Note2: vCore should not fluctuate by more than +/- 0.100V. If it does, improve cooling
on MOSFETs
Note3: If an attempt fails and the computer doesn’t boot, hold down Insert key when
booting to restore default settings in BIOS
Part6. Finalising
-Lower vCore by one notch at a time until lowest possible while maintaining the same
stableness
-Do the same for vMCH, vFSB, vICH after the above step is completed
-Record the BIOS settings which works (except DFI and ASUS owners)
-(Optional) Pull off a PCMark and/or SuperPi32M score and compare to stock to gauge
performance increase
P.S. Thx to THG,ASUS,Gigabyte forums and specially GOOGLE
P.P.S. If u r not able to boot then try clearing ur CMOS Battery

Special Thanks To Rajesh For this Article

Note:- Please note the Tech-Nologic Is not responsible for any Mishaps . Do it at your own risk

Easter Eggs

Easter EGGS

Meaning?

  1. In the context of software an Easter Egg is a hidden feature or novelty that the programmers have put in their software .

A true Easter Egg must satisfy the following criteria:

Undocumented, Hidden, and Non-ObviousAn Easter Egg can’t be a legitimate feature of a product, or be an obvious part of a storyline. Easter Eggs will usually stand out either because they totally don’t fit with their context (like a pinball game in a word processor), or because they have a deeper hidden personal meaning to the creators, so they threw it in for entertainment.

ReproducibleEvery user with the same product or combination of products must be able to produce the same result given the instructions. If others can’t reproduce an Egg, then it doesn’t belong in this archive.Put There by the Creators for Personal Reasons
The Egg must have been put there on purpose, and furthermore have a personal significance to the creators beyond just making a better product (movie, TV show, software program, etc).

Not Malicious
Easter Eggs are there for fun, not to do damage.

ENTERTAINING!
The most important element… if it’s not there for entertainment, it’s not an Egg.

Reasons?Behind?Putting Easter?Eggs

As a Signature – In the software world, many programs are released simply under a company brand, with no mention of the individuals who put in a lot of work on the product. So you often see Easter Eggs listing the people who worked on the project as a sort of hidden “We made this!” signature.

As an Inside Joke – Most groups of people who work together for a while develop their own inside jokes. Sometimes these inside jokes get slipped in as Easter Eggs, into Software, Movies, Music, etc. Often, an outsider would either not notice or be confused and not understand these Eggs, but that’s the point – they are inside jokes.

Vanity – Directors will sometimes make uncredited appearances in their own movies as some bit part, and only people who actually know the director are be able to tell. Sometimes they’ll also cast friends or relatives in parts also for kicks.

Tribute – An author or director might want to pay subtle tribute to someone or something they admire. For example, if a book is made into a movie, the original author may appear in an uncredited bit part.

To Add Something Personal – They put something in for no good reason other than just because they want to. Like Jerry Seinfeld hiding a Superman reference in every episode of his show.